[Question] Controlled traffic farming (CTF)

[Skog]

Hi! I'm having problems with Controlled traffic farming (CTF) so I am doing 36M tramlines with every equipment being 12M. But when I want to do a course with 2 multiple tools, it doesn't match with the tramlines; when doing 3, it works again. When doing one tool with two headlands it works which is the same as one headland with two tools but that doesn't work. Everything works perfectly otherwise, so I'm just wondering why 2 aren't lining up.

[nitroSkirata]

It might be helpful if you added some illustrations to your post.

For rightnow I am not really sure what isn't lining up

[Tensuko]

I dont know what CTF is.
I only know proseed for this and even that we wont support.

[coatsy35]

Controlled traffic is the idea of only ever driving on the same tramlines year in year out, never moving from them. You have to use RTK signals in real life that never move, to do this. A lot of larger arable units in Europe are now on this system if they are direct drilling only or adopt a variation of it. You generally would then have implement widths that divide into the tramline widths i.e. 36m sprayer tramlines, would use a 12.3m header so you catch any overlap and then use a 6m or 12m cultivator and drill. When combining the unloader (usually a chaser bin but can be a trailer) would always sit on the tramline and never come off it. Meaning all heavy machines which cause the most damage (sprayer in wet periods and unloader) always stay on a tramline.

[coatsy35]

Hi! I'm having problems with Controlled traffic farming (CTF) so I am doing 36M tramlines with every equipment being 12M. But when I want to do a course with 2 multiple tools, it doesn't match with the tramlines; when doing 3, it works again. When doing one tool with two headlands it works which is the same as one headland with two tools but that doesn't work. Everything works perfectly otherwise, so I'm just wondering why 2 aren't lining up.

You haven't got any overlap set have you? that would throw it out

[Tensuko]

Getting the exact same lines over and over again is nearly impossible. With headlands it is even harder.

[coatsy35]

Agreed.

[Skog]

Hi! I'm having problems with Controlled traffic farming (CTF) so I am doing 36M tramlines with every equipment being 12M. But when I want to do a course with 2 multiple tools, it doesn't match with the tramlines; when doing 3, it works again. When doing one tool with two headlands it works which is the same as one headland with two tools but that doesn't work. Everything works perfectly otherwise, so I'm just wondering why 2 aren't lining up.

You haven't got any overlap set have you? that would throw it out

Hi so no I have taken away the overlap, had that problem already when the 36M course and 12M course didn't line up=) But now it does

[Skog]

Getting the exact same lines over and over again is nearly impossible. With headlands it is even harder.

Ye I know but there haven't been any problems before and I know that in fs19 it worked so I just took it for granted that it would work. I even think that I have done 12M with two tools before and it has line up to the 36M course.

[Skog]

Here you can see what i mean with that the one 12 M equipment it llines up with the tramline but with two tool it doesn't