Gate 2 still energy pinned to 100

[AllexVeldman]

Occasionally the msr-2 will report a still target while there is none.
This is due to gate 2 still energy reporting 100, a radar restart or ESP reboot don't clear it.
Walking into the room does fix it.

I currently have to set the G2 still threshold to 100 to prevent my lights in the garage to always be on.

[coderabbitai]

🔗 Similar Issues

Related Issues

• Apollo MSR-2 detects only up to ~2m #42

👤 Suggested Assignees

• patricksmms

---

Enable issue planning

_{To enable issue planning, add the following to your .coderabbit.yaml:}

issue_enrichment:
  planning:
    enabled: true

_{You can then request a plan by commenting @coderabbitai plan on any issue.}

🧪 Issue enrichment is currently in open beta.

You can configure auto-planning by selecting labels in the issue_enrichment configuration.

To disable automatic issue enrichment, add the following to your .coderabbit.yaml:

issue_enrichment:
  auto_enrich:
    enabled: false

💬 Have feedback or questions? Drop into our discord or schedule a call!

[bharvey88]

Thanks for opening this issue. Please confirm you have already tried re-seating the mmwave sensor as shown in this teardown video: https://www.youtube.com/watch?v=hkNrhJuMmxI

If that does not work, please try clicking on the "factory reset radar" from the device page of the MSR-2. Sometimes this will "kick it into gear" so to speak.

If this still does not work, please try moving the mmwave sensor to another location and confirming that the gate 2 energy is still stuck at 100%. This will rule out an environmental cause such as a fan moving, hvac air currents, curtains moving, etc.

If you are still unable to get it working please reach out to our support at support@apolloautomation.com or head to our discord https://dsc.gg/apolloautomation I am closing this issue as it's really not a yaml issue (github is for yaml issues/improvements etc).